Figure 1-45.
Maintenance Indicator Branched Wiring
Harness 3W107, Third View.
Remove the Fuel Maintenance System Branched Wiring Harness 3W105
(1). You start this removal process by removing the two screws (4),
lockwashers (5), and washers (6) from one side of the duct (2) and
remove the electrical straps (7). Cut off any electrical ties (8)
remaining.
Then you must disconnect plug connector 3W105-P35 (9)
and 3W105-P5 (10) from the pickup receptacle J5 and J35 (11) (fig.
1-46).
Figure 1-46.
Fuel Maintenance System Branched Wiring
Harness 3W105.
37
OD1707
Previous Page
