Remove the Forward Reduction Gearbox Tube Assembly.
NOTE:
If the engine has a fuel nozzle with one filter, ensure you have
removed the tube assembly (electro-mechanical fuel system to fuel
nozzle) prior to starting this removal process.
Start this removal process by removing the screw (2) and self-
locking nut (3) from the loop clamp (4) and removing the clamp from
the tube assembly.
Then, remove the two screws (5), washers (6),
and nuts (7) from the other loop clamps (8 and 9), and remove the
clamp (8) from the tube assembly (1). Next, unscrew the tube nut
(10) from the tube assembly (11), and lift the tube assembly from
the engine (fig. 1-51).
Figure 1-51.
Forward Reduction Gearbox Tube Assembly.
WARNING
TO AVOID ELECTRICAL SHOCK OR BURNS, DO NOT TOUCH THE
END OF THE IGNITION ELECTRICAL LEAD UNLESS IT IS
GROUNDED.
41
OD1707
Previous Page
