Figure 1-49.
Reduction Gear Hose.
Next, remove the flange to hose elbow by loosening the hex screw (2)
on the hose clamp (3).
Then, remove the two bolts (4) from the
elbow (1) and bend the hose (5) up and slide the elbow (1) off the
hose. Complete the removal process by removing the gasket (6) from
the compressor housing (7) (fig. 1-50).
Figure 1-50.
Flange to Elbow Hose (Reduction Gear).
40
OD1707
Previous Page
