retaining pin (7). Push lightly on the lockpin (14) and push in on
the other retaining pin (7) until the lockpin slides all the way
down in the groove on the retaining pin (10). You must repeat this
process for the other side of the engine.
If the retaining pin (7) has holes (11), push one retaining pin (7)
through the bushings (16 and 17). Aline the hole (11) on the pin
with the two holes (18) in the bushing (17), and place one lockpin
(14) all the way down through the holes (11 and 18).
You must
repeat this process for the other side of the engine.
Figure 1-41.
Forward Module Retaining Pins.
This completes part A. This lesson continues with part B, which tells you
how to remove the forward engine module.
PART B - REMOVAL OF THE FORWARD ENGINE MODULE FROM
THE AGT TURBINE ENGINE
1.
Tools.
Prior to starting the actual removal procedure, you must have the necessary
tools on hand at the work site:
General mechanic's tool kit, automotive (SC 5180-90-N26).
33
OD1707
Previous Page
