Figure 1-39.
Disconnecting the Accessory Gearbox.
_______
WARNING
Heavy parts can crush you.
Keep out from under and clear of heavy parts at
all times.
Remove the Accessory Gearbox from the Engine.
Slowly lower the
accessory gearbox module (11) below the shafts (12 and 13) (fig.
1-39). Remove the two bolts (1), lower the jack (2), and unhook the
two latches (3) on the maintenance stand (fig. 1-40).
CAUTION
TO PREVENT DAMAGE TO THE PLUG (4), MAKE SURE THE PLUG
DOES NOT HIT THE FRONT PLATE (5) WHEN MOVING THE
MODULE FORWARD.
You must lower the module (6) enough to clear the engine air inlet
(7) when you move it forward.
Turn the handle on the maintenance
stand (8) counterclockwise until the
31
OD1707
Previous Page
