Figure 1-59.
Tube Assembly (In-Line Pressure Fluid Filter to
the Electromechanical Fuel System).
Install the Tube Assembly (Electromechanical Fuel System to
Fuel Nozzle). Position the tube assembly (1) on the powerpack
and loosely connect one tube nut (2) to the fuel system (3)
and the other tube nut (4) to the adapter (5). Then tighten
both tube nuts (fig. 1-60).
Figure 1-60.
Tube Assembly (Electromechanical Fuel System to
Fuel Nozzle).
54
OD1708
Previous Page
