Figure 1-10. Tube Assembly (Electromechanicalfuel System to Fuel Nozzle).

Figure 1-9. Lubricating Oil Tank Removal, 2nd View.

Figure 1-11. Tube Assembly (In-Line Pressure Fluid filterto Electromechanical Fuel System).

Removal of the Accessory Gearbox and Forward Engine Module of the AGT
Page Navigation
10

Tube Assembly (Electromechanical Fuel System to

Remove the Power Turbine Stator Feedback Control Assembly.

start this removal process by pushing in the button (3) on the

quick-release pin (4) and removing the pin from the control (1) and

lever (5). Then, take the control off the lever and install the pin

in the lever. Loosen and unscrew the nut (6) all the way, and slide

the control down and out of the bracket (2) (fig. 1-12).

To remove the other end of the control (1) from the bracket (2), you

first remove the cotter pin (3) from the pin (4) and remove the

control and two washers (5) from the pin. Loosen and unscrew the

nut (6) all the way, slide the control down and out of the bracket

(2), and remove it from the powerpack (fig. 1-13).

Western Governors University

Privacy Statement
Press Release
Contact

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business