loop clamp (8) on the oil tube (2) and bracket (9). Once you have
removed the screw and nut, push the tube and clamp away from the
bracket, and install the screw and the nut on the clamp.
Next,
remove the two screws (10) that connect the oil tube and disconnect
the coupling (11) on the tube (4) from the tank coupler (12).
Remove the tubes (3 and 4) from the coupler (12) and remove the
packings (13 and 14) (fig. 1-8).
Figure 1-7.
Accessory Gearbox Vent Hose.
Figure 1-8.
Lubricating Oil Tank Removal, First View.
8
OD1707
Previous Page
