Figure 12.
Hydraulic Reservoir, Filter, and Filler Cap.
o Remove the hose assembly (2), elbow (5), and reducer (6) from the
suction line ball valve.
Disconnect the return line hose
assembly (7) from the return line elbows (8 and 9). Remove the
elbow (9) from the return line filter (10). Remove the elbow (8)
and reducer bushing (11) from the hydraulic reservoir cover plate
(12).
o Remove the suction line ball valve (1), nipple (13), elbow (14),
and bushing reducer (15) from the hydraulic reservoir (4).
o Remove the two screws (16), flat washers (17), and the fill
support plate (18) from the bulkhead support bracket (19).
19
OD1703
Previous Page
