WARNING
Turn the engine T/A panel MAINTenance switch to the
vertical position.
Make sure the locking pin is
installed in the valve actuator guard of engine
extinguisher cylinder bottle no. 1 and install locking
pin in valve actuator guard of engine extinguisher
cylinder bottle no. 2.
o Having made the necessary preparations, you can now begin removal of
the engine T/A panel by disconnecting the wiring harness plug (Item
7) from the engine T/A panel (Item 6).
o Supporting the engine T/A panel, remove four nuts (Item 8), four
lockwashers (Item 2), eight flat washers (Item 10), and four screws
which hold the panel to the mounting bracket (Item 1). You can now
remove the panel and discard the removed lockwashers.
Figure 30.
Engine AFES T/A Panel.
47
OD1700
Previous Page
