WARNING
ALWAYS PUT THE POSITIVE CONDUCTOR BUS (1) ON FIRST.
YOU
CAN BE BURNED OR SHOCKED IF THE NEGATIVE BUS IS PUT ON
BEFORE THE POSITIVE BUS (FIG. 1-22).
Perform the next step only if the tank has an auxiliary power unit.
Connect the positive quick-disconnect (7) of cable 2W168
(8) and the negative quick-disconnect (9) of cable 2W169
(10), and install the positive terminal board guard (fig.
1-22).
Figure 1-22.
Connecting Tank Powers.
This completes part A.
This lesson continues with part B, Ground Hop
Procedures.
24
OD1709
Previous Page
