Figure 1-17.
Lifting the Powerpack.
WARNING
THE CAPS (1) ON THE TRANSMISSION OUTPUTS ARE LOOSE AND CAN
FALL OFF. TO AVOID INJURY, STAY OUT FROM UNDER THE OUTPUTS
WHEN LIFTING THE POWERPACK FROM THE TANK (FIG. 1-18).
l. Position the Powerpack on the Blocks and Remove the Sling. To
position the powerpack on the blocks and remove the sling, follow the
procedure below:
Place two blocks of wood (4) about three feet apart on the
ground to support the rear of the powerpack, and center one
block of wood (5) five feet from the other blocks to
support the front of the powerpack.
19
OD1709
Previous Page
