This completes part A.
This lesson continues with part B, a
description of how to install the accessory gearbox on the AGT
turbine engine.
PART B - INSTALLATION OF THE ACCESSORY GEARBOX OF THE AGT
TURBINE ENGINE.
1.
Tools.
Prior to starting any portion of the installation procedures, you
must have the necessary tools on hand at the work site.
The following item numbers reference TM 9-2835-255-34, appendix D,
except as noted:
General mechanic's tool kit; automotive (SC 5180-90-N26).
Combination wrench, 1-1/4-inch (item 16).
Conduit style slip joint pliers with plastic jaw inserts (item
31).
Ratchet handle, 3/8-inch drive (item 9).
Socket, 3/8-inch drive, 1/2-inch (item 12).
Torque wrench, 0 - 600 inch-pounds (item 17).
Wire twister pliers (item 101).
Chain-fall hoist, 1000-pound minimum capacity (item 10).
Hoist, 1000-pound minimum capacity (item 11).
The following item numbers reference TM 9-2350-264-20-1, appendix E:
Auto adjustable wrench, 15-inch (item 221).
Chemical and oil protective gloves (item 74).
Deep style socket 1/2-inch drive, 9/16-inch (item 184).
Deep style socket 1/2-inch drive, 3/4-inch (item 186).
Faceshield (item 66).
Industrial goggles (item 75).
24
OD1708
Previous Page
