nuts, then tighten both nuts (12 and 14). Now loosely connect
the nut (16) on the reducer (17) and tighten the nut (fig.
1-19).
Figure 1-19.
Pressure Fluid Filter.
Install the Fuel Management System Branched Wiring Harness
(3W105).
Lay the harness (1) on the powerpack and join
connector 3W105-P37 (4) to connector 3W105-1-J37 (2).
Then
position the clamp (5) and install the screw (6) and new nut
(7).
With the clamp in place, put the harness under the
bracket (3) and join connector 3W105-P33 (8) to the fuel
system connector J33 (9) (fig. 1-20).
19
OD1708
Previous Page
