Figure 1-22. Maintenance Indicator Branched Wiring
Harness (3W107), First View.
Connect the harness (1) to the relay (2), exciter (3), and the
float switch (4) by putting the two terminals 3W107-X1 and
3W107-X2 (5) on the relay terminals 3K101-X1 and 3K101-X2 (6)
and securing them with two washers (7), new lockwashers (8),
and nuts (9).
Then connect the 3W107-P16 connector (10) to
the exciter receptacle connector J16 (11) and 3W107-P8 (12) to
the switch connector J8 (13) (fig. 1-23).
Figure 1-23. Maintenance Indicator Branched Wiring
Harness (3W107), Second View.
22
OD1708
Previous Page
