Liquid measure, 2-quart capacity (item 115).
Torque wrench, 0 - 175 foot-pounds (item 245).
Crowfoot wrench set (item 219).
Extension, 3/8-inch drive, 12-inch (item 59).
Ratchet handle, 3/8-inch drive (item 88).
Open end wrench, 1-1/2 inch (item 233).
Open end wrench, 1-7/16 inch (item 234).
Angle nose slip joint pliers (item 258).
Extension, 3/8-inch drive, 6-inch (item 58).
Extension, 3/8-inch drive, 12-inch (item 59).
Socket, 3/8-inch drive, 7/16-inch (item 167).
Torque wrench, 0 - 200 inch-pounds (item 246).
Torque wrench, 0 - 600 inch-pounds (item 251).
Socket, 1/4-inch drive, 7/16-inch (item 165).
Socket, 1/4-inch drive, 5/16-inch (item 162).
Ratchet, 3/8-inch drive (item 88).
Electrical connector slip joint pliers (item 128).
Tapered drive pin punch, 1/4-inch (item 138).
Deep style socket, 3/8-inch drive, 7/16-inch (item 193).
Adapter, 1/2-inch to 3/8-inch (item 5).
2.
Supplies.
Prior to starting any portion of the installation procedures, you
must have the necessary supplies on hand at the work site:
The following item numbers reference TM 9-2835-255-34:
Flared conical seal (two required) (item 27, appendix E).
Flared conical seal (item 56, appendix E).
25
OD1708
Previous Page
