5.
You must remove the conveyor assembly and support stand. Including yourself,
how many people are required to perform this maintenance procedure?
A.
2.
B.
4.
C.
6.
D.
8.
6.
You must remove the idler sprocket assembly. Which of the following components
must be removed prior to starting the removal process?
A.
Conveyor chain.
B.
C.
Conveyor roller assembly.
D.
Conveyor dead end section.
7.
You must troubleshoot the conveyor assembly.
The MASTER switch and the flow
control valve must be in which of the following positions prior to starting the
troubleshooting procedures?
A.
MASTER
switch
ON, flow control valve open.
B.
MASTER
switch
OFF, flow control valve open.
C.
MASTER
switch
ON, flow control valve closed.
D.
MASTER
switch
OFF, flow control valve closed.
8.
You are troubleshoot conveyor assembly and have disconnected the conveyor
harness.
The multimeter indicated that continuity exists is the conveyor
harness. Which of the following actions must you take?
A.
Continue troubleshooting.
B.
Notify support maintenance.
C.
Replace the override switch.
D.
Replace the conveyor harness.
9.
You are troubleshoot conveyor assembly.
Using a multimeter you have checked
the continuity between connector socket C and the solenoid connector pin A.
The multimeter remained on infinity. Which of the following actions must you
take?
A.
Continue troubleshooting.
B.
Notify support maintenance.
C.
Replace the override switch.
D.
Replace the conveyor harness.
46
OD1737
Previous Page
