Figure 1-28.
Fuel Connections and Controls.
Remove the fuel hose (4) from the adapter (5) on the fuel
system (fig. 1-29).
Perform this step only if the fuel nozzle has two fittings (8).
Install the tee (1) to the adapter (5) (fig. 1-29).
Install the electro-mechanical fuel system tube assembly to
the fuel nozzle.
Push the coupling
half
(9)
on
the
fuel
hose
coupling
(10)(fig. 1-29).
Set the number 7 circuit breaker (11) on the distribution
box (12) to the ON position and close the cover (13)(fig.
1-29).
33
OD1709
Previous Page
