Figure 1-51.
Screen Assembly (Engine Air Inlet),
First View.
Perform this step only if two bolts (2) and a bolt (3) and
lockwasher, hold the screen assemble in place (5) (fig. 1-52).
Apply adhesive around the inside of the screen's flange (1)
between points 2 and 3. Place the screen on the housing (4)
and align the three bolt holes in the screen and housings.
Install the two bolts (5) and install the bolt (6) and new
lockwasher (7). Bend the tab of the lockwasher up against the
head of the bolt (6) and coat the head of the bolts (5 and 6)
with adhesive (fig. 1-52).
Connect the connector 3W105-P34
(8)
to
the
receptacle
connector J34 (9) (fig. 1-52).
Figure 1-52.
Screen Assembly (Engine Air Inlet),
Second View.
48
OD1708