M2/M3 BFV: HULL POWER DIST SYSTEM - OD1606 - LESSON 1/TASK 1
on the negative terminal and secure with a lock washer and nut.
Finally, install the lamp socket on the back of the gage.
5.
Conclusion
In this lesson, the components that comprise the hull power
distribution system on the BFV were discussed.
In addition to
describing the components that comprise this system, the procedures
used to remove and install these components were presented.
In the next lesson, the procedures used to troubleshoot the hull
power distribution system will be discussed.
This discussion will
include the use of special test equipment and the procedures for
connecting the STE-M1/FVS vehicle test meter (VTM only).
35
Previous Page
