Figure 1-59. Removing the Forward Engine Module from the Rear Engine Module.

Figure 1-58. Forward Engine Module Lifting Sling.

Figure 1-60. Installing the Maintenance Sling on the Module

Removal of the Accessory Gearbox and Forward Engine Module of the AGT
Page Navigation
48

Tighten the jackscrews (9) evenly until the forward module (2) moves

away from the rear module (3); then remove the jackscrews (fig.

MAKE SURE THE MODULE FLANGES ARE ALINED BEFORE MOVING

IF THEY ARE NOT ALINED, BINDING AND

EQUIPMENT DAMAGE MAY OCCUR.

Make sure the flanges (10) are alined before moving the dolly. To

separate the forward and rear modules completely, turn the handle

(11) on the maintenance stand counterclockwise until the forward

dolly (12) stops at the end of the stand (13) (fig. 1-59).

Figure 1-59. Removing the Forward Engine Module

from the Rear Engine Module.

Heavy parts can crush you.

Keep out from

under and clear of heavy parts at

Western Governors University

Privacy Statement
Press Release
Contact

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business