General mechanic's tool kit, automotive (SC 5180-90-N26).
Accessory gearbox module lifting sling.
Deep style socket, 3/8-inch drive, 7/16-inch.
Open end wrench, 1-and-3/8-inch and 1-and-1/2-inch.
Adapter, 1/2-inch to 3/8-inch.
Deep style socket, 1/2-inch drive, 3/4-inch.
Deep style socket, 1/2-inch drive, 9/16-inch.
Ratchet handle, 3/8-inch drive.
Crowfoot wrench set.
Extension, 3/8-inch drive, 6-inch.
Extension, 3/8-inch drive, 12-inch.
Socket, 1/4-inch drive, 5/16-inch.
Socket, 1/4-inch drive, 7/16-inch.
Socket, 3/8-inch drive, 7/16-inch.
Wrench, open end, 1-and-1/2-inch.
Wrench, open end, 1-and-7/16-inch.
Chemical and oil protective gloves.
Chain-fall hoist, 1000-pound minimum capacity.
Hoist, 1000-pound minimum capacity.
2.
Establishing the Correct Equipment Conditions.
To establish the correct equipment conditions, you must remove or disconnect
other components or parts that interfere with the removal of the accessory
gearbox.
The following paragraphs describe the items you must remove or
disconnect prior to removing the accessory gearbox from the AGT turbine
engine. Once you have removed the items, inspect and replace any defective
components and discard any conical seals and preformed packings.
Remove the Powerpack from the Tank. You must remove the powerpack
from the tank (TM 9-2350-264-20-1-3) and drain
2
OD1707
Previous Page
