M2/M3 BRADLEY FIGHTING VEHICLE: TURRET - OD1609 LESSON 2/TASK 3
WARNING
Battery posts and cables touched by metal objects can short
circuit and burn or injure. Use caution when working with
tools or other metal objects.
Do not wear jewelry when
working on or near an electrical system.
CAUTION
Incorrect cable installation can cause a short circuit.
Install the positive cable before installing the negative
cable.
Step 4.
Lift the cover for lead 2W2, found on the battery, and install lead 2W2
and nut onto the clamp.
Step 5.
Lift the cover for cable 2W15, found on the battery, and install cable
2W15 and nut onto the clamp.
(4)
Installation of the Center Turret Floor Plate.
Install new floor plate,
four washers, and screws onto the floor plate frame.
3.
Conclusion
This concludes the example of the replacement procedure for the encoder and
slipring, and the replacement procedures for the turret system of the Bradley
fighting vehicle.
As mentioned previously, whenever a mechanic is actually
performing these procedures on the vehicle, he should make sure that all the
necessary manuals and materials are on hand.
94
Previous Page
