M2/M3 BFV: FIRE CONTROL SYSTEM - OD1608 - LESSON 2/TASK 1
acronym (abbreviation) for the part in the drawing, the
drawing
itself, and potential test points on the illustrated part.
b. Fault Number Index. A fault number index directs the mechanic
to a follow-on procedure or maintenance task needed to correct
faults. A fault number on the SETCOM during testing indicates that a
fault has been found. The fault number index contains a fault number
which matches the number appearing on the SETCOM during testing when
a fault has been found. The index also contains a message matching
that on the SETCOM describing the fault that has been found.
The
index then shows an action which tells where to go in the technical
manuals to find the next procedure to correct the fault, along with a
page number where the follow-on procedure or maintenance procedure
can be found.
7.
Conclusion
Knowing how to set up the STE-M1/FVS test set and how to perform the
self-test is a big step towards learning how useful the test set can
be in testing and troubleshooting components on the Bradley fighting
vehicle fire control system.
Task 2, of this lesson, will present
the specific instructions for performing night vision system test
2733.
85
Previous Page
