M2/M3 BFV:
STEERING SYSTEM - OD1605 - LESSON 1/TASK 1
(2) Procedural Steps for Removing the Steering Control Link and
Bellcrank Assembly.
NOTE
Locknuts, cotter pins, and keywashers
should
always be discarded after removal.
Step 1. Lower and secure the trim vane, and then open and secure the
power unit access door.
Step 2.
Remove link (1) from lever (2) by removing locknut (3),
screw (4), and three washers (5)(see figure 11).
FIGURE 11.
REMOVING CONNECTING
LINK FROM LEVER.
20
Previous Page
