The transmission is mounted cross-wise in the vehicle and at the rear
(flywheel end) of the engine.
Figure 1-1 illustrates how the
transmission is mounted to the engine assembly.
Figure 1-1.
Transmission Mounted on Engine.
Power is transmitted from the engine to the transmission through a
torque converter.
The torque converter is a fluid coupling and a
torque multiplier. The increased torque from the torque converter is
extended through selected planetary gears to the transmission output
shafts, The left and right output shafts then transmit the power to
the final drive assemblies. The final drive assemblies then turn the
drive sprockets which operate the left and right tracks.
This
completes part A. Continue on to part B where you will learn the use
of the technical manual applicable to the X200-4 cross-drive
transmission.
PART B - HOW TO USE THE TECHNICAL MANUAL
How well you accomplish your assigned tasks depends on how well you
learn to use the technical manual (TM) applicable to the cross-drive
transmission. The TM is one of the most valuable tools available to
the track vehicle repairman because it
2
OD1714
Previous Page
