General mechanic's tool kit; automotive (SC 5180-90-N26).
Chemical and oil protective gloves (item 74).
Deep style socket, 3/8 in. drive, 1/2 in. (item 194).
Socket, 3/4 in. drive, 30-millimeter (item 180).
Socket, 13-millmeter (to disconnect final drives).
Engine and transmission sling (item 157).
Ground hop parts kit assembly (item 125).
9,000-pound capacity hoist (item 255).
5-ton capacity hoist (item 256).
Industrial goggles (item 75).
50-foot measuring tape (item 209).
Pocket knife (item 312).
Rachet handle, 3/8 in. drive (item 88).
Rachet handle, 3/4 in. drive (item 89).
Torque wrench 0 - 200 inch pounds (item 246).
Torque wrench 0 - 175 foot pounds (item 245).
Torque wrench 0 - 600 foot pounds (item 250).
Wire brush (item 19).
b. Supplies.
You must have the following supplies available at
the work site to remove the powerpack from the M1 Abrams tank. (All
item numbers given refer to TM 9-2350-264-20-5 appendix C, which
gives a NSN and reference.)
Adhesive, seal (item 4).
Aircraft grease (item 44).
Dry cleaning solvent (item 35).
Four lengths of Manila rope (item 80).
Plastic sheet (item 74).
2
OD1709
Previous Page
