MAINTENANCE OF THE HEMTT - OD1662 - LESSON 1/TASK 2
SGT Boyle removes the four nuts (1)(figure 39), lockwashers (2), eight
washers (3), four screws (4), and two clamps (5). He disconnects the
six airhoses (6) and removes the reservoir (7).
If necessary to
replace, clamps (12) can now be removed. Once the reservoir has been
removed, he removes the four nuts (8), lockwashers (9), washers (10),
and screws (11). Finally, he removes the two clamps (12).
FIGURE 39.
AIR RESERVOIR REMOVAL.
61
Previous Page
