M2/M3 BFV: FIRE SUPPRESSION SYST - OD1607 - LESSON 1/TASK 2
(1) If the inner extinguisher
is
being
installed,
manually
traverse the turret to 5600 mils.
(2) If the inner extinguisher is being installed, install it on
the bracket by performing these steps:
(a) Position the extinguisher on the bracket with the valve
pointing away from the bracket (figure 17 on page 22).
(b) Have a helper assist in closing the two clamps.
(c) Install two new locknuts on the two clamps.
FIGURE 15.
DISCONNECT THE EXTINGUISHER LEVER.
20
Previous Page
