M2/M3 BFV: FIRE SUPPRESSION SYST - OD1607 - LESSON 1/TASK 2
FIGURE 18.
INSTALLING THE OUTER EXTINGUISHER.
(7) Remove the quick
release
pin
from
the
valve
(refer
to
figure 13 on page 18).
(8) Remove the antirecoil plug from the extinguisher (refer to
figure 10 on page 12).
(9) If the fire suppression system was discharged, the fire
suppression DISCH (discharge) light must be reset. To do this, push
down and release the toggle switch on the vehicle distribution box
(refer to figure 6 on page 7).
(10) Using a lock wire, attach a new instruction tag (figure 19
on the following page) to the extinguisher.
(11) If the inner extinguisher
has
been
installed,
manually
traverse the turret to 6400 mils.
23
Previous Page
