M2/M3 BFV: FIRE SUPPRESSION SYST - OD1607 - LESSON 1/TASK 2
FIGURE 16.
REMOVING THE EXTINGUISHER
FROM THE BRACKET.
(3) If the outer extinguisher is
being
installed,
use
this
procedure to install it on the bracket:
(a) Position
the extinguisher in the bracket with the valve
resting against the
guard (figure 18 on page 23).
The distance
between the top of
the valve and the top of the clamp should be
between 7 1/2 inches
and 9 1/2 inches.
(b) Have a helper assist in closing the two clamps.
(c) Install two new locknuts on the two clamps.
21
Previous Page
