Figure 14. Adjust Output Generator Voltage.

M2/m3 Bradley Fighting Vehicle: Hull Power Distribution System
Page Navigation
16

Once the generator voltage has been adjusted, close and secure

the

power unit access door. This is done by raising up on the door

and

removing the door brace from the hole in the door frame. Allow

the

door to close, turning the handle and re-padlocking the handle in

the

locked position.

Now raise and secure the trim vane by standing on the trim vane and

releasing the trim vane latch.

Raise the trim vane to the stowed

position and secure the trim vane latch.

Check to ensure that the

trim vane latch is engaged.

This completes the procedures for

removing and

installing the dc

generator. Next, the procedures