Figure 1-25 Vehicle Adapter Assembly

Figure 1-22. M1/3A1 Front Wall

Figure 1-27 LD/R Installation

Introduction To The Ground/ Vehicular Laser Locator Designator (G/VLLD )
Page Navigation
27

Vehicle Adapter

Vehicle Adapter

e. Install G/VLLD set into vehicle adapter assembly. If the vehicle adapter

assembly and the TU are not already assembled, assemble as per step (1) below.

Once the TU is mated to the vehicle adapter assembly, mount the LD/R to the TU.

Install the G/VLLD set as described below.

(1) Refer to figure 1-27. Place the TU (2) on top of the vehicle adapter

assembly (4) so that the flanges (5) line up with the swing bolts (3). Rotate the

swing bolts up into the flange slots and tighten by turning clockwise.

Do not move vehicle with LD/R mounted on the machine gun

All equipment must be properly stowed inside the

vehicle prior to vehicle movement.

Western Governors University

Privacy Statement
Press Release
Contact

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business