travel lock (6) up into the roof travel bracket (9), and
putting the lock pin in the bracket (fig. 1-9).
NOTE:
You may have to raise or lower the main gun to engage the lock
pin.
Figure 1-9.
Gunner's Station (Second View).
After you have secured the main gun, open the circuit breaker
access cover (2) on the turret network box (1) and set all
circuit breakers on the turret network box to the ON position.
Then, at the loader's panel (3), set the turret blower switch
(4) to the OFF position and the gun/turret drive switch (5) to
the powered position (fig. 1-10).
16
OD1711
Previous Page
