Socket, 1/4-inch drive, 7/16-inch (item 163).
Wrench, open end, 1-1/2-inch and 1-3/4-inch (item 233).
Auto adjustable wrench, 15-inch (item 221).
2.
Supplies.
Prior to starting any portion of the installation procedures, you
must have the necessary supplies on hand at the work site.
The following item numbers reference TM 9-2835-255-34, appendix E,
except as noted:
Antiseize compound (item 2, appendix B).
Cotter pin (two required) (item 14).
Gasket (item 15).
Laminated shim (item 13).
Lubricating oil (item 11 or 12, appendix B).
Self-locking nut (96 required) (item 16).
Shortening compound (item 20, appendix B).
Expander spring (three required) (item 49).
Nonelectric wire (item 15, appendix B).
Seal ring (three required) (item 48).
The following item numbers reference TM 9-2350-264-20-1, appendix G,
except as noted:
Antiseizing tape (item 97, appendix C).
Cotter pin (two required) (item 5).
Cotter pin (item 255).
Flared conical seal (item 28).
Flared conical seal (item 27).
Flared conical seal (item 29).
Flared conical seal (item 30).
3
OD1708
Previous Page
