Figure 1-38.
Series and Parallel Connected Resistors.
Figure 1-39.
Filter Circuit.
Inductors are also elements of the transformer used in the circuit in
figure 1-39.
The primary of T1 induces its AC voltage onto the
secondary of T1.
In this case the secondary of the transformer is
center tapped to provide dual outputs in the secondary. Transformers
may be designed to produce a variety of outputs relative to their
input. Figure 1-40 shows a typical power transformer with outputs of
5, 6.3, 350, and 700 volts from a 110 volt input.
24
OD1725
Previous Page
