MAINTENANCE OF THE M88A1 - OD1672 - LESSON 1/TASK 1
c.
Fluid Capacities.
Fuel tanks .......................................................... 400 gal
Main engine crankcase (refill) ..................................... 16.5 gal
Transmission .........................................................17 gal
Main winch ...........................................................11 gal
Hoist winch ...........................................................3 gal
Auxiliary power unit ............................................... 3 1/2 qt
Hydraulic system .....................................................95 gal
Mechanical transmission ...............................................1 gal
d. Performance.
Vehicle speed (max.) .................................................26 mph
Cruising range .................................................... 300 miles
Fording depth (max. without kit) ...................................... 56 in
Fording depth (max. with kit) ........................................ 102 in
Grade ascending ability (max.) ................................... 60 percent
Grade descending ability (max.) .................................. 60 percent
Vertical obstacle vehicle will
climb (forward only) ..................................................42 in
Maximum trench crossing width ..................................... 8 ft 7 in
Turning circle (right or left) ........................................ pivot
Boom capacity ....................................................... 25 tons
e.
Vehicle Hoisting Capacity.
Spade up.............................................................6 tons
Spade up (with lockout blocks)-4-
part line........................................................... 20 tons
Spade down -4-part line ............................................. 25 tons
Boom lift height (8 ft reach) ...................................... 22.54 ft
Boom lift height (4 ft reach) ..................................... 25.125 ft
Hoist winch cable size .............................. 5/8 in dia. 200 ft long
Hoist winch line pull and speed
with bare drum ................................................ 50,0000 lb at
9 feet per minute (fpm)
Hoist winch line pull and speed
with full drum .......................................... 30,000 lb at 13 fps
Main winch cable size ............................. 1 1/4 in dia. 200 ft long
Main winch line pull and speed
with bare drum .......................................... 90,000 lb at 20 fpm
Main winch line pull and speed
with full drum .......................................... 51,400 lb at 42 fpm
Draw bar pull ..................................................... 90,000 lb
8