M2/M3 BFV: TROUBLESHOOTING - OD1610 - LESSON 2/TASK 1
TABLE 2.
FAULT MESSAGE - STOP TEST. (CONTINUED)
(e) Checking CIB Cable CX304. If no fault message appears on the
SETCOM display, the self-test can continue with a check for a defective CIB
cable. The first CIB cable to be checked is cable CX304 (figure 13 on page
62).
CAUTION
Be careful when connecting cable CX304 to the CIB.
The connector pins are easily bent or broken.
The SETCOM display should read CONNECT CX304 TO CIB J1.
Plug in connector
CX304-P2 to the J1 connector on the CIB.
69
Previous Page
