M2/M3 BRADLEY FIGHTING VEHICLE: TURRET - OD1609 LESSON 3/TASK 1
TABLE 1.
FAULT MESSAGE - STOP TEST.
(CONTINUED)
(5)
Checking CIB Cable CX304.
If no fault message appears on the SETCOM
display, the self-test can continue with a check for a defective CIB cable.
The
first CIB cable to be checked is cable CX304 (figure 22 on the following page).
CAUTION
Be careful when connecting cable CX304 to the CIB.
The
connector pins are easily bent or broken.
Step 1.
The SETCOM display should read CONNECT CX304 TO CIB J1.
Plug in
connector CX304-P2 to the J1 connector on the CIB.
117
Previous Page
