611
Figure 2
612
Para 3c
614
Para 11
615
CORRECT. In the 60-ampere system the field current should not exceed
1 ampere of current.
617
Study figure 3 to determine the correct answer.
619
Para 8e(2)
621
CORRECT.
The 100-ampere regulator is a solid-state device.
623
Para 6a(1)
624
Para 5a
625
CORRECT.
Positioning the armature under test completes this magnetic
circuit.
627
Para 4i
628
Para 3e
629
CORRECT. The pivot arm and mounting brackets are left mounted to the
test stand after a test.
630
Para 5f
631
Para 4c(3)(a) 2
633
CORRECT.
Meter, cables, and leads are also checked at this time.
634
Para 4b
635
Para 10b
636
Para 10c and fig 39
637
CORRECT. Since the WYE ("Y") configuration makes one common
connection between the stator coils, it can be checked for an open
circuit.
638
Para 4c(3)(b) 3
639
CORRECT.
This switch is used when checking alternator dropoff
voltage.
640
CORRECT. The meter shunt keeps most of the current to be
measured from flowing through the meter movement.
641
CORRECT. The 1-1/2-ton, 2-wheeled, cargo trailer carries the generator
for the basic set.
642
CORRECT. The zero adjustment is located below the lens in the middle
of the meter.
643
Para 16b
15
Previous Page
