536
Fig 33, 34, and 36
537
CORRECT. After polishing the sliprings they are cleaned with
compressed air.
539
Take another look at figure 14
541
CORRECT. A high resistance between the sliprings indicates an open
field winding.
543
CORRECT.
The yoke cover contains the pivot Joint for the shift lever.
545
Para 5a(5)
546
Para 4c
547
Para 9b(4)
549
Para 3a
551
Para 9b
553
CORRECT. Once the RPM has been determined the tachometer is switched
to the CAL PULLEY position so the adjustment can be made.
555
CORRECT. The field voltage is the best way to control the generator
voltage output.
556
This would be a waste of lubricant.
Consult figure 5, the
lubrication chart.
557
Para 8e(1)
558
Para 7b
559
CORRECT. The capacitor assembly is for suppressing radio
interference generated by the ignition system.
561
Para 10f
562
Para 8d
563
Consult figure 22 to determine the effects of temperature on
specific gravity
565
Para 5d(2)(b)
567
CORRECT.
The basic regulator principle is a switching action.
569
Para 3a and 3b and fig 1
570
Para 5a
572
CORRECT. The tachometer reads drive head speed directly when in the
direct position, but it must be calibrated according to formula when
a pulley driven generator is being tested.
573
Para 17f
575
Para 2i
576
Para 4a
13
Previous Page
