USE/CARE OF HANDTOOLS & MEASURING TOOLS - OD1621 - LESSON 2/TASK 1
(2) Slide Hammer Puller. When using a slide hammer puller (figure 70
on the previous page), lock the jaws with the locking feature and slide the
hammer handle up the shaft in the direction of the pull. The combination
yoke provided with this puller enables the mechanic to pull a variety of
items by the different combinations and settings of jaws.
(3) Push and Pull Puller Set. The universal push and pull puller set
(refer back to figure 67 on page 90) is probably the best all around puller
combination available.
Several combinations of its component parts are
discussed and illustrated, in (a) through (d) below.
(a) Removing and Installing Bearing Cup. Figure 71 shows the push
and pull puller and the bearing cup pulling attachment used to remove a
bearing cup from a cage. The same combination is used to install it back in
the cage, as shown in figure 72 on the following page.
FIGURE 71.
REMOVING BEARING CUP.
94
Previous Page
