USE/CARE OF HANDTOOLS & MEASURING TOOLS - OD1621 - LESSON 2/TASK 1
(6) Cylinder Sleeve Puller. The cylinder sleeve puller is adjustable
to provide clearance regardless of the number or position of the cylinder
head studs, and to accurately center the tool over the bore (figure 79).
Four adapter plates are supplied with the puller which cover sleeves from 4
1/4 to 5 3/4 inches in diameter.
The adapter is positioned so that the
cylinder sleeve rests on the edges of the adapter.
The puller swivel
assembly is inserted from the top and screwed into the adapter.
When
tightening the forcing screw, a steady force is applied which will pull the
sleeve out of the cylinder.
FIGURE 79.
USING CYLINDER SLEEVE PULLER.
e. Care of Benders and Pullers. Keep benders and pullers clean at all
times. Grease or oil on the gripping edges will make the tool slip. Clean
all tools after use and store them so that the threads and gripping surfaces
will not become damaged. Make certain attachments and adapters are stored
with the basic puller and do not become separated.
99
Previous Page
