M2/M3 BRADLEY FIGHTING VEHICLE: TURRET - OD1609 LESSON 1/TASK 1
(6)
AP LO Button and Indicator Light.
The AP LO button selects 25mm AP low
rate of fire (about 100 rounds per minute).
The indicator light goes on when AP LO
is selected.
(7)
AP HI Button and Indicator Light.
The AP HI button selects 25mm AP high
rate of fire (about 200 rounds per minute).
The indicator light goes on when AP HI
is selected.
(8)
HE SS Button and Indicator Light. The HE SS button selects 25mm HE single
shot mode. The indicator light goes on when HE SS is selected.
(9)
HE LO Button and Indicator Light.
The HE LO button selects 25mm HE low
rate of fire (about 100 rounds per minute).
The indicator light goes on when HE LO
is selected.
(10)
HE HI Button and Indicator Light. The HE HI selects 25mm HE high rate of
fire (about 200 rounds per minute).
The indicator light goes on when HE HI is
selected.
(11)
7.62 Button and Indicator Light.
The 7.62 button selects the coax
machinegun firing mode.
The indicator light goes on when the coax machinegun is
selected.
(12)
LO AMMO OVRD Button.
The LO AMMO OVRD button allows the 25mm or coax
machinegun to fire the remaining ammo after the LO AMMO indicator light flashes.
(13)
LO AMMO Indicator Light. The LO AMMO indicator light starts flashing and
the 25mm or coax machinegun stops firing when the end of the belt passes sensors on
the ammo can. It stays on when the LO AMMO OVRD button is pressed.
(14)
GRENADE LAUNCHER Switch and Indicator Light.
The GRENADE LAUNCHER switch
selects power ON or OFF to the smoke grenade launcher.
The indicator light goes on
when the smoke grenade launcher is armed.
(15)
TRIGGER Button and Indicator Light.
The TRIGGER button fires all eight
smoke grenades. The indicator light goes on when the trigger button is pressed.
23
Previous Page
