INTRO TO M2/M3 BFV - OD0456 - LESSON 2/TASK 1
prepared for a functional group, or assembly.
A "V" appearing in this
column in lieu of a quantity indicates that
no specific quantity is
applicable (e.g. shims, spacers, etc).
(10) Usable on Codes.
Usable on codes are shown in the description
column.
Uncoded items are applicable to all models.
Identification of
usable on codes used in this publication are:
TABLE 2.
USABLE ON CODES.
4.
Use of the M2/M3 SPAS Manual in Unit Maintenance
The SPAS manuals are organized so that the maintenance procedures will be
easy to find and easy to perform. Each volume of a manual has a table of
contents, and the final part of each volume contains an alphabetical index.
a.
Use of Unit Maintenance Manuals.
Two series of manuals are used at
the unit level. These are TM 9-2350-252-10 and TM 9-2350-252-20.
In the
subparagraphs that follow the use of each of these manuals will be
discussed.
(1) TM 9-2350-252-10 - Operator's Manual.
Four different types of
procedures or tasks are described in this manual. They are operation tasks,
maintenance tanks, Preventive Maintenance Checks and Services (PMCS) tasks,
and troubleshooting tasks.
A task listed in this manual is the
responsibility of the operator and/or crew.
(2) Finding the Correct Task or Procedure.
Pick a key word from the
vehicle part or system to be used during the task. Look in the alphabetical
index for this key word or the name of the action you will perform. Then,
turn to the page
30
Previous Page
