PRIN. OF DRAFTING AND SHOP DRAWINGS - OD1641 - LESSON 1/TASK 3
FIGURE 51.
SOLUTION TO ISOMETRIC DRAWING
PROBLEM USING AN ISOMETRIC
TEMPLATE.
point is marked "0", and the two intersections are marked points 1 and 2 (figure
51, view A).
Step 2. Draw a rectangular box and transfer the points 1, 2, and 0 to the front
plane of the isometric drawing (views B and C).
Step 3. Project the points in the front plane across the isometric drawing to the
back plane (view D), and label them 3, 4, and 5.
Step 4.
Align the proper hole in the isometric ellipse template with the center
lines on the front
60
Previous Page
