Interleave

Troubleshoot The High Mobility Multi- Purpose Wheeled Vehicle (HMMWV)
Page Navigation
79

(1) Interleave (Test 01).

This test alternately measures engine

speed and a second parameter such as fuel pressure or alternator

voltage.

To initiate interleave, dial 01 into the TEST SELECT

switches and press and release the TEST button.

The prompting

message PASS will signal the mechanic to dial in a second test number

and again press and release the TEST button.

(2) Minimum Value (Test 02). This test displays the minimum value

measured during a test. To initiate a minimum value display, dial 02

into the TEST SELECT switches and press and release the TEST button.

The prompting message PASS will signal the mechanic to dial in the

desired test number and again press and release the TEST button. The

minimum value is displayed and updated whenever a lower minimum Value

is measured.

Entering 02 and the test number again will reset the

process and a new minimum value will be displayed.

(3) Maximum Value (Test 03). This test displays the maximum value

measured during a test. To initiate a maximum value display, dial 03

into the TEST SELECT switches and press and release the TEST button.

The prompting message PASS will signal the mechanic to dial in the

desired test number and again press and release the TEST button. The

maximum value is displayed and updated whenever a higher maximum is

measured.

Entering 03 and the test number again will reset the

process and a new maximum value will be displayed.

(4) Peak-to-Peak Value (Test 04). This test displays the peak-to-

peak value of 0-45 volts dc (no-go test number 89), 0-1500 Amps dc

(no-go test number 90) and battery Volts (go test 67).

To start a

peak-to-peak measurement, dial 04 into the TEST SELECT switches and

press the TEST button.

The prompting message PASS will signal the

operator to dial in one of the three test numbers (89, 90, 67) and

again press the TEST button.