OD1402 - Lesson 1/Learning Event 1
OSCILLOSCOPE PROBES
When a waveform is to be analyzed, a probe may be used. Most
probes are supplied with more than one tip, which can be inserted
on the end of the probe (figure 15, below). These tips may be
changed by unscrewing them from the end of the probe and screwing
the desired tip in place.
Probe Ground Strap
A ground strap is also supplied with the probe. The spring clip of
the grounding strap clamps over the bared portion of cable at the
upper end of the probe. The other end of the ground strap uses an
alligator clip for connection to the
FIGURE 15. OSCILLOSCOPE PROBES.
28
Previous Page
