247
Para 8e(4)
248
Para 6
250
CORRECT. The parameters measured during the STALL TORQUE test
are the torque and current.
252
Take another look at figure 7.
253
CORRECT. To preclude damage the switches and controls have preset
positions.
255
CORRECT.
This check should be made monthly.
256
Para 17f
257
Para 4c
258
CORRECT. Those batteries provide the potential for ohms
measurement on the R X 10,000 scale.
259
Para 2e
260
Para 2b(3)
262
Para 6c(1)
264
CORRECT. With a tension of 10 ounces the spring's length should
be 1 inch.
266
CORRECT. The pinion housing assembly is the first to be removed
during disassembly.
268
Para 4c(3)(b) 4
271
CORRECT. If the regulator is operational the output voltage should
remain stable no matter what load is applied; otherwise it is not
operational.
273
Para 8d
274
Para 7e
275
Take another look at figure 11
276
Para 1a(4)
277
Para 9b
278
Para 2h
279
CORRECT. They must be connected in series to provide 6V, 12V,
and 24V outputs.
281
Para 11a(2)(b)
282
Para 5d(2)(b)
284
Para 5a(4)(a)
286
CORRECT. During assembly the brushes and their holder are installed
in the frame assembly first.
287
Para 2a(3)
5
Previous Page
