168
Para 1b
169
Para 7b
170
CORRECT. The purpose of a regulator is to limit the generator
voltage to a safe value.
172
CORRECT. The other components are in the high voltage compartment
and the main circuit breaker must be turned OFF when working in that
area.
173
Para 3e
175
Para 2d
177
Para 6c(1)
178
Para 10d(4)
179
CORRECT. Higher temperatures cause expansion of the electrolyte
and will therefore lower the hydrometer reading.
181
Para 6d
183
Para 8d
184
CORRECT. If the generator speed increases the output voltage
will also; so, to reduce the voltage, the field voltage which
controls the field current must be reduced to protect the
generator.
186
Para 9b
188
Para 2a
189
Para 3a
190
Figure 1
191
Para 2a
192
Para 18h(2)
193
CORRECT.
This will release grease pressure on the bearings.
194
Para 4c(3)(b) 4
195
Para 4c(1)(a)
197
Para 5f
198
CORRECT.
All other moving parts are lifetime lubricated.
199
Para 11
200
Para 2
202
Para 5b
204
CORRECT. For the varidrive unit to remain operating, there must
be airflow to actuate the flow sensing switch.
205
Para 6a
3
Previous Page
